Drawings and Their Functions
1. Drawings are divided into two (2) groups. What are these two groups and what are their purpose?
Complete the table below:
|
Drawings |
|
|
Types of Drawings |
Purpose |
2.What are the three (3) types of services often shown on Service Plans?
3.What drawings make up a set of plans for Council Development Application approval?
4.What three (3) surveys are you likely to require to be carried out when constructing a new home on a vacant block of land?
5.Review the plans for this Medium Rise Project. Answer the following questions in relation to these plans.
|
Medium Rise Project Plans |
|
|
Question |
Response |
|
What sheet shows you the basement plan? |
|
|
Which sheet shows you the North East Shopfront Elevation? |
|
|
Identify three (3) different features or types of information this particular elevation shows you. |
1. |
6.Drawings are divided into two (2) groups. What are these two groups and what are their purpose?
Complete the table below.
Reading Residential Drawings and Specifications
Referring to the Aldinga Project Drawings to answer questions 1 to 18 in this assessment.
These drawings are for Lot 704 Kaurna Avenue, Aldinga Beach, SA.
The set of drawings contain the following:
- WD01 – Site plan
- WD02 – Floor plan – Ground
- WD03 – Elevation
- WD04 – Section Detail – wall and boundary gutter
- WD05 – Section Detail – raised portico
- WD06 – Section Detail – wall sections
- WD07 – Section Detail – garage
- WD08 – Electrical Plan x 2 sheets
- WD09 – Wet Area
- SR3/A – Footings/slab
- Fittings/Product details
Question
1. Using the plans provided give a general description of the project (for example, how many bedrooms, garages, stories, type of floor, roof and external walls).
2.List three (3) Australian Standards referred to in the drawings.
3.What are three (3) of the scales used to prepare the drawings?
4.What is the version number of the drawings?
5.How do you know these drawings are approved for construction by the client?
6.What easements, if any, are identified and what is their position in relation to the proposed dwelling?
7.What is the total area of the proposed dwelling found in the title block?
8.How many stormwater downpipes are required for this dwelling?
9.Describe the layout of the residence.
10.What is the overall length and width of the dwelling?
11.What is the material of the external wall?
12.Give the quantities of each of the following three items, and calculate the materials cost for each (a) and (b):
|
Quantities and Material Cost |
||
|
Items |
Quantity |
Material Cost |
|
(a) Smoke alarms (suppliers cost $57 each) |
||
|
(b) Internal doors 820mm wide (suppliers cost $63.50 each) |
||
|
(c) Windows, including sliding doors |
||
13.The Roof trusses need to be designed to withstand what wind speed?
